THE DESIGN / A32 A32 wheel face, AI-enhanced design reference

A32

NOST TECH / WHEEL COLLECTION

A325-Lug Flow-Formed Wheel

A32 is listed in 18x8 with a 5x165.1 bolt pattern and ET10 offset. This option has a 113.1 mm centre bore. The listed finish is glossy black.

18 × 8SIZE / INCHES5 × 165.1BOLT PATTERN / MM10OFFSET / MM

CATALOGUE FINISHGlossy Black

Explore specifications ↓

SPECIFICATION REFERENCE

26 October 2026 catalogue. Confirm current availability and vehicle fitment with our team.

ON THE VEHICLE / INTERACTIVE 3D

SEE THE STANCE.

PHOTO + 3D

DESERT OFF-ROADDRAG TO ROTATE · SCROLL TO SWITCH VIEWDRAG TO ROTATE

PRODUCT WHEELA32

Wheel finish

Photo-based wheel face with simple 3D depth. Drag within the front three-quarter view. Visualisation only; specification, clearance and fitment require confirmation.

Model & photo credits

Models: Ford F150 Raptor 2021 — David_Holiday; Jeep Wrangler — Suyog modak; Ford Mustang Shelby 2012 — David_Holiday. CC BY 4.0. Adapted paint, visible branding, wheels and web compression; original assembly transforms retained. Jeep uses simplified visual brake rotors. Wheels are photo-based styling reconstructions; unseen geometry is inferred. Wheel faces use AI-enhanced catalogue references. These are styling illustrations, not fitment measurements. Scene backgrounds are AI-generated.

A32 / CATALOGUE DATA3 VARIANTS

Select a listed variant as the starting point for your enquiry.

Model: A32
Product reference: A32188013S3056
Diameter × width: 18 × 8 in
Offset (ET): 10 mm
Bolt pattern (PCD): 5 × 165.1 mm
Centre bore (CB): 113.1 mm
Finish: Glossy Black
Construction: Flow forming

Load rating, clearance and installation hardware require a separate application review.

CATALOGUE OPTIONS / A32

A32 5x165.1 wheel sizes and finishes

A32 is listed as a flow-formed wheel in 16-inch and 18-inch diameters. Compare these catalogue references by size, drilling and finish.

18x8 · 5x165.1 bolt patternET10 offset · 113.1 mm centre boreglossy blackReference A32188013S3056
16x7 · 5x165.1 bolt patternET20 offset · 113.1 mm centre boreglossy blackReference A32167007S3509

Other listed finishes include glossy black machined face. See the variant table for the exact finish by reference.

Can I compare 18x8 and 16x7 A32 wheels in 5x165.1?

A32188013S3056 is the 18x8 reference with ET10 and a 113.1 mm centre bore. A32167007S3509 is 16x7 with ET20 and a 113.1 mm centre bore. A diameter change calls for a new tyre-size and clearance check.

Which A32 part number is glossy black or glossy black machined face?

For 18x8, 5x165.1 and ET10, the catalogue lists A32188013S3056 for glossy black and A32188014M3056 for glossy black machined face. Use the exact code when matching a replacement or ordering the same finish again.

See all listed variants ↓How to read wheel fitment specs ↗Request a fitment review ↓

LISTED VARIANTS.

Keep size, bolt pattern and offset together when requesting a quote.

Reference	Size (in)	PCD (mm)	ET (mm)	CB (mm)	Finish
A32188013S3056	18 × 8	5 × 165.1	10	113.1	Glossy Black
A32188014M3056	18 × 8	5 × 165.1	10	113.1	Glossy Black Machined Face
A32167007S3509	16 × 7	5 × 165.1	20	113.1	Glossy Black

APPLICATION AND PROCUREMENT / A32

A32 fitment and ordering guide

A32 wheel width and offset comparison

Compare the 18x8 ET10 reference A32188013S3056 with the 16x7 ET20 reference A32167007S3509. Both use 5x165.1 and a 113.1 mm centre bore. Relative to the first reference, the second has an inner rim position 2.7 mm farther from the suspension and an outer rim position 22.7 mm farther inside the fender.

This estimate uses nominal rim width and offset. Check tyre section width, brake clearance and actual wheel profile before approval.

Order A32 by finish and part number

For 18x8, 5x165.1 and ET10, use A32188013S3056 for glossy black and A32188014M3056 for glossy black machined face. When replenishing stock, specify quantities by code and ask for a current finish photo to check against your previous order.

What to request before placing an order

Ask for the load rating per wheel and test report scope for A32188013S3056. Confirm whether the centre cap, nuts or bolts, hub rings and TPMS valve hardware are included. For a custom or private-label order, put the finish sample, packaging, lead time and warranty terms on the quote.

Wheel fitment measurements ↗Wholesale wheel enquiries ↗OEM and custom wheel enquiries ↗Download the RFQ checklist ↓

THE VEHICLE. THE WHEEL. THE WHOLE LOOK.

BUILD
INSPIRATION.

Modified pickups and custom wheel styling.
Use these references to show us the direction you have in mind.

Vehicle styling references. The wheel models shown are not identified as A32; these photos do not establish fitment.

01 / THE STANCE

THE BUILD
SETS THE DIRECTION.

Share the look you want to achieve. We will review the actual wheel specification against your vehicle and setup.

LOOK BEYOND THE WHEEL

A FULL
VEHICLE VIEW.

A reference from the front, side and three-quarter angle helps explain the intended stance.

FINISH & CONTRAST

MAKE THE
DETAILS COUNT.

Bring together the wheel finish, body colour and the vehicle’s overall proportions.

05 / YOUR NEXT PROJECT

Save the references you like.
Send us the vehicle details that matter.

Read the pickup wheel guide ↗

FROM A REFERENCE TO YOUR REQUIREMENTS

LET’S TALK
A32.

Send your vehicle model, year, wheel specification and quantity.

Download the RFQ checklist ↓